Unit Ventilators

• Versatile Configurations: Choose from four optimized airflow configurations (VFV, VFF, VCV, VCF) to enhance installation flexibility.
• Model Sizes: Available in 4 capacities to suit your needs: 750, 1,000, 1,250, and 1,500 CFM.
• Coil Options: Coils can be selected as 2 or 4-row for chilled water/hot water 2-pipe systems or as an evaporator coil for DX split air conditioning systems. Optional 1-row or 2-row dedicated hot-water coils, or 1-row steam coils, are available for 4-pipe systems and can be positioned for either preheat or reheat applications.
• Temperature Control: Discharge temperature is managed through a face-and-bypass damper or a modulating control valve for optimal performance.
• Air Mixture Control: Fully modulating outside air and return air dampers allow for customizable airflow combinations.
• Microcontroller Option: Optional factory-installed microcontroller available for enhanced control capabilities. Units can be configured as DDC-ready or set up for field-installed controls as needed.
• Piping Packages: Optional factory-assembled piping packages for streamlined installation.

• • Ceiling Mounted: Bottom or Rear Return Air; Top, Rear, or No Outside Air configurations

• Discharge Air Arrangements
  • Floor bar grille and screen, front discharge duct collar, front discharge double-deflection grille
  • Floor bar grille and screen, front discharge duct collar, down-discharge double-deflection grille

• Cooling Options
  • None
  • 2-Row Chilled Water/Hot Water 2-Pipe
  • 4-Row Chilled Water/Hot Water 2-Pipe
  • Direct Expansion (DX), Cooling Only, with R-454B refrigerant & A2L sensors (not available with F&B Control)

• Heating Options
  • None
  • 1-Row Hot Water Coil
  • 2-Row Hot Water Coil
  • Steam Coil (1-Row)
  • 2-Pipe CW/HW (share same coil)

• Coil Access & Position
  • Right-hand or Left-hand coil connections, and positions for single coil, preheat, or reheat.
  • Right-hand cooling and left-hand heating, or left-hand cooling and right-hand heating, and positions for single coil, preheat, or reheat.

• Damper Assemblies
  • Insulated Outside Air Damper
  • No Damper (Recirculating Unit only).

• Supply Voltage & Motor Configuration:
  • 115V, 208V, 230V, or 277V single-phase power paired with either standard or high-static EC motors (offering 3-speed or modulating 0-10VDC control).

• Electrical Connection Location
  • Left-hand side or Right-hand side.

• Unit Controls Package
  • Field-installed Controls
  • Factory DDC
  • Integrated Modine Controls System (featuring a Carel controller).

• Unit Filters (Factory installed)
  • 70–75% Standard Arrestance
  • MERV 10
  • MERV 13.

• Coil/Piping Packages (Floor-mounted units only):
  • 2-way or 3-way control valve piping packages for Chilled Water and Hot Water.

• Cabinet Finishes & Paint Color:
  • Beige, Sky White, or Light Gray (Hammertone Finish) View Color Guide

• System Component Upgrades:
• • BACnet Network Card (for Carel Controls)
  • Hand-Held Display Module (for Carel Controls)
  • Aquastat (for 2-Pipe System Changeover)
  • Condensate Pan Float Switch (Floor- or ceiling-mounted)
  • Hot Water Coil Freeze Protection
  • Needlepoint Bipolar Ionization (NPBI®)
  • Supply Fan Current Switch

Field-Installed Accessories (Shipped loose for installation on-site)

• Controls & Air Sensors (Field-Mounted)
  • CO2 Sensor
  • Digital Wallstat (Temperature control only; for Modine Controls System)

• Structural & Mechanical Accessories
  • Condensate Pump Kit (Configured by supply voltage, coil access, and piping package)
  • Slotted Return Air Kickplate (Sized for 750 to 1500 cfm floor units)
  • Wall Sleeves (8″–14″ adjustable depth)
  • Outside Air Wall Louvers: 4.0″ Deep, AMCA-rated clear anodized aluminum louvers.

• Floor Unit Cabinet Accessories (For matching depth of 16 5/8″ or 21 7/8″ cabinets)
  • Side Panels: Left-side and Right-side full panels or cut-out panels (7″, 18″, 22″, or 2″ Step-down).
  • Utility Compartments: 12″, 18″, or 24″ wide utility cabinets.
  • Filler Sections: 6″, 12″, or 18″ wide filler components (available with or without sub-bases).
  • Unit Sub-Base Kits: Floor sub-bases available in 1″, 2″, 4″, and 6″ heights.
  • Utility Compartment Sub-Bases: Sized for 12″, 18″, and 24″ widths at heights of 1″, 2″, 4″, and 6″.

• Maintenance Accessories
  • Touch-Up Spray Paint: Cans matched to Beige, Sky White, or Light Gray finishes.
  • Replacement Air Filters: Sized for unit cfm capacities (available in Standard, MERV 10, or MERV 13 ratings).